Digit code is easily changed to any 4, 5 or 6 digit code using the code changing kit provided with each lock. Unlike non mechanical digital locks which the code can be changed by programming from the keypad, The Lockwood DX digital lock would require removal from door to do perform a combination change.

Operation from Outside
Press the C button, enter the correct code, then turn the knob to unlock the door. Upon releasing the turn knob the code is automatically cancelled.

Operation from Inside
Opened by knob/lever at all times.

Finishes, Satin Chrome and Polished Brass Plate.

This lock is available in stock and same day supply and installation is available.

There are a wide variety of mechanical or non mechanical digital locks available, contact us at anytime on (02) 9232 8839 for further information.

Desk and cupboard drawer key lock bodies are usually made from zinc diecast. Any lock type made from zinc diecast are not strong and can easy be snapped, also, the thinness of the desk or cupboard drawer does not sustain a secure installation. In saying this, you should not solely rely on these key locks to securely secure your important documents and personal possessions. I keep telling my customers that cupboard and desk drawer key locks are put in place to keep the innocent out!

Also be aware that most cupboard and desk drawer key locks show digit numbers on the face of the key cylinder, with these digit numbers, keys to operate the lock can be cut and be easily purchased  from your local Master Locksmith store.

If you require key locks to your cupboard and desk drawer to better protect your documents or possessions , there are new secure cupboard and desk drawer key locks available, made from either solid steel or brass bodies and the key cylinders are pick resistant, they can also be only operated by a registered “DO NOT COPY” security key.

Feel free to contact us at anytime to discuss your options of these types of locking systems.

A.D.I double block lock to suit double doors, sliding or inward or outward opening. Single block locks also available for single doors.

• suitable for exterior doors, hinged, tilting or sliding
• Suit aluminum or wooden doors.
• 13mm hardened bolt
• supplied with strike
• hardened steel pin fits through the side of the body
• complete with all fixing screws.
• Security Master Keying Available.

Feel free to contact us at anytime for further information.

Electronic magnetic locks are a locking device which consists of an electromagnet and a holding plate.

The magnetic lock is suitable for both in-swing and out-swings doors. They are ideal for applications from cupboard doors through to high use commercial glass doors. They are mainly used on Tampa glass doors where drilling or cutting into the door is not an option. Most installations are surface mounted with the cabling or wiring inserted into the cavity of the wall, ceiling, frame or wooden door, out of view.

These electromagnetic locks are fire rated up to 4hrs on fire doors.

They are fail safe, which means in case of power failure, the magnetic locks unlocks.

Specifications

• Fail Safe
• Silent Operation, no buzzing sound.
• Holding force 1125lb
• Field selectable dual voltage
• Instantaneous release
• Aluminium Finish
• Locked or unlocked LED light indication.

If you require further information, please feel free to contact us at anytime.

Lockwood Panic exit devices in accordance with BCA (building codes of Australia) and all applicable fire and safety code requirements. Used in conjunction with a Lockwood 3572 mortice lock for single or double doors.

Features include:

– Supplied with Synergy 3572 mortice lock offering restricted keying options
– Operates on a push of a horizontal bar fitted across the door
– Suitable for 900mm and 1200mm width doors
– Surface mounted
– Deadlatching via use of the mortice lock
– 4 hour fire rated
– Cylinder key holdback function via mortice lock use
– Suitable for single and double door applications
– Door thicknesses of 35mm-45mm

We would more than happy to discuss with you your BCA requirements and options, feel free to contact us at anytime.

Positions available is for a 1st year apprenticeship, complete training available, and second position available is for an experienced 3rd, 4th or qualified tradesman Locksmith for various on field lock work.

For confidential interview, please contact Ronnie on 0417 468 227 or email your resume to keys@cbdlocksmiths.com.au

The Crow standalone keypad is a standalone keypad primary used in an electronic access control system.

Features

With fast, easy programming up to 80 different user codes via the keypad, the CL2000 series is ideal for a wide range of entry control applications such as health, education, commercial and residential environments.

Electronic functionality provides major benefits over mechanical locks, such as programming at the keypad, multiple codes, one-time user codes and soft press use of buttons.

Operation  from code pad side is by key or entering in the correct code and turning knob, inside operation is via a turn knob or pull down lever which is unlocked at all times, free to egress.

-          Can be used with deadlatches, mortice locks or nightlatches where locks are not supplied with digital.

-          Allows up to 80 user codes and 10 1 time user codes.

-          Codes can be 4, 5 or 6 digits long.

-          On door programming via master code.

-          LED indicates locked or unlocked.

-          Over 80,000 operations from 4 x AA cells (supplied with lock).

-          Low battery warning.

-          “Code free” (passage mode0 free to enter and exit at all times setup from keypad.

-          12 months warranty.

We have been installing this series of digital lock for the past 2 years with no warranty call back, we have been even using it on our store room for over 2 years now without a single hitch, batteries have not even gone flat yet! Tested, proven, impressed and highly recommended. Call us on (02) 9232 8839 for further information or demonstration.

An MLAA member locksmith is a member of the Master Locksmith Association who has passed practical and theory tests and is confirmed to be fully licensed. Only approved MLAA members have restricted access to its security product range. When assigning an MLAA member to install a security key system for you, MLAA members guarantee that you will control the issue of keys to your restricted key system.

The MLAA locksmith is bound by contract, code of ethics and strict code of conduct, which is legally enforceable, not to cut keys for your restricted system without your authorisation. Non MLAA members such as Key cutters and hardware stores simply do not have access to these keys to cut them.

MLAA member locksmiths can create custom keying systems that may be as simple as two locks that use the same key (keyed alike).

They can also create complex master keying systems that allow sophisticated key control throughout entire buildings such as offices and factories, and cover all types of locks including door locks, padlocks, cupboard locks, and locks for cabinet and drawers.

In many cases, your existing locks can be maintained and MLAA locksmiths will fit registered design components to them.

Protecting your property using restricted keying systems is part of everyday work of a MLAA locksmith.

Remember to look for the MLAA logo, this is your guarantee of professional security.

Lockwood as we know it today is leading the way in security locking products.

Lockwood emerged from a diversified manufacturing organisation called Ogden Industries in 1934.

It was here the foundations were laid for Lockwood to become a focused manufacturer of locking systems. In April 2000, Lockwood Security Products became an integral part of the ASSA ABLOY group of companies.

ASSA ABLOY is the world’s leading provider of mechanical, electro-mechanical and electronic locking solutions, employing 25,000 people worldwide.

The group produces the highest quality security locking products for residential, industrial and commercial buildings.

The Lockwood Advantage

• Leading the trend toward higher security
• New products developed in accordance with relevant Australian Standards
• Manufacturing in Australia since 1934
• Quality endorsed company (ISO 9001)
• Research and development departments with extensive testing facilities and capabilities.
• Comprehensive keying system options available on most products
• Sales and technical representatives and support throughout Australia and New Zealand.

We here at CBD Locksmiths have been installing Lockwood security products for over 16 years and found the product to be of the highest quality. If you are seeking quality in security locking products that you can trust and rely on, always seek Lockwood. We highly recommend it.

If you haven’t locked up with Lockwood, have you really locked up?